Features: Powerful 5.5V/5A Switching BEC Optional programming card for convenient setup ESC had separate programming lead built-in so there is no need to unplug from RX Super fine throttle resolution provides first-rate and highly accurate linearity Super smooth adjustable start-up mode Constant RPM mode (governor mode) Adjustable F3A brake. 3 steps adjustable normal EMF brake High anti-interference capability Low voltage cut-off protection with automatic adjustment for NiCd/NiMH/Li-Ion/LiPo/LiFePO4 Soft cut-off option at low voltage, slows motor RPM gradual rather than hard cutoff (LVC) Low voltage cut-off can be disabled Variable cut-off voltage / cell Active free-wheeling circuit allows for unlimited "partial load" capability LED status display Adjustable motor timing from 0° to 30° Blocked rotation protection (senses a jammed motor and stops motor rotation) Motor reversing from ESC (no need to change ESC/motor wires) Over-temperature protection and overload alarm Throttle signal lose protection. If the signal is lost for 3 seconds, the power will automatically cut-off. Safe power-on. (Motor will not start until throttle is returned to lowest position)
***This ESC is compatible with both helicopter and airplane models.***
スペック: 連続: 40A 瞬間: 50A for 10 seconds 電圧: 2-6 cells li-XX or 6-16 Ni-MH/Ni-Cd battery BEC: 5.5V/5A Switching BEC PWM: 8~16 KHz Max RPM: 240,000rpm for 2 Poles Brushless Motor PCB Size: 50x25x12mm 重さ: 43g (including wires)